If you are unable to access the projector through a
web browser, make sure you are using the correct ID and password,
which are case sensitive.
- For the user
ID, enter EPSONWEB. (You cannot
change the user ID.)
- For the
password, enter the password set in the projector's Network menu.
The default password is admin.
- Make sure
you have access to the network the projector is on.
- Make sure you enter the projector's IP address in
the web browser address bar.
- If your Web browser is set up to connect via a proxy
server, the Epson Web Control
screen cannot be displayed. Make settings for a connection without
using a proxy server.
- If you have problems while controlling the projector
using Art-Net, any operations you perform using the projector
remote control or control panel may cause your software operations
to be applied incorrectly. To apply channel controls to the
projector, set Channel 13 to Cannot
control, then set it back to Can
control.
Note: The
user ID and password are case sensitive.