| Volume
|
Varying levels available |
Adjusts the volume of the projector's speaker system or
external speakers |
| Source
|
Signal Format
Overscan
EDID
HDMI Out Intensity
|
Displays settings selected for the current input source
Signal Format:
sets the signal type and video range for certain input
sources
- Video Signal:
specifies the signal type from input sources connected to video
ports; if interference appears or no image appears when set to
Auto, select the appropriate
signal type
- Video Range: sets
the video range to match the setting of an input source connected
to the HDMI ports or HDBaseT
port
Overscan: changes
the projected image ratio to make the edges visible by a selectable
percentage or automatically when projecting a component signal
EDID: describes the
display capabilities of your projector; change this setting as
necessary according to the resolution of the current input source
(you can select EDID settings for individual input sources without
having to change the input source)
HDMI Out Intensity:
adjusts the signal intensity input from the HDMI Out port; change this setting when you
cannot display the image output from the HDMI Out port correctly |
| A/V Output
|
While Projecting
Always On
|
Determines when the projector outputs audio and images
to external devices; set to Always
On to output audio and images when the projector is in
standby mode
This setting is only displayed when Quick Startup is set to Off in the projector's Operation menu,
Auto Power On is set to
Off in the projector's Network
menu, or Power On Trigger is set
to Plug-in Detection in the
projector's Operation menu. |
| Inverse Audio
|
On
Off
|
Set to On to invert
the audio's left and right channels to match the projector's
installation position |
| Audio Output
|
Auto
Audio
Audio1
Audio2
|
Sets the audio input port when projecting from input
sources other than HDMI, HDBaseT, LAN, and Screen Mirroring |
| HDMI Audio Output
|
HDMI1
HDMI2
HDMI3
|
Sets the audio input port when projecting from one of
the HDMI ports |
| Monitor Out Port
|
Monitor Out
Computer2
|
Selects the function of the Computer2/Monitor Out port
Monitor Out: select
this option when outputting an image signal to an external
monitor
Computer2: select
this option when inputting an image signal from a computer |
| HDMI Link
|
Device Connections
HDMI Link
Audio Out Device
Power On Link
Power Off Link
|
Adjusts the HDMI Link options that allow the projector
or remote to control HDMI-connected devices that support the CEC
standard
Device Connections:
lists the devices connected to the HDMI1, HDMI2, and HDMI3 ports
HDMI Link: enables
or disables the HDMI Link feature
Audio Out Device:
selects whether to output audio from the internal speakers or a
connected audio/visual system
Power On Link:
controls what happens when you turn on the projector or a linked
device
- Bidirectional:
automatically turns on the connected device when you turn on the
projector, and vice versa
- Device -> PJ:
automatically turns on the projector when you turn on the connected
device
- PJ -> Device:
automatically turns on the connected device when you turn on the
projector
Power Off Link:
controls whether linked devices are turned off when the projector
is turned off |
| HDBaseT
|
Connect ELPHD02
Control
Communications
Extron XTP
|
Connect ELPHD02: set
to On to use the optional HDBaseT
control pad. Make sure this setting is disabled if you are not
using an HDBaseT control pad.
Control
Communications: enables or disables communication from the
Ethernet and serial ports on the transmitter; turning on this
setting disables the projector's LAN and RS-232C ports (Connect ELPHD02 and Extron XTP must be turned off to use this
setting)
Extron XTP: set to
On when you connect an Extron XTP
transmitter or switcher to the HDBaseT port |
| HDMI EQ Setting
|
1
2
3
|
Adjusts the HDMI input signal level depending on the
devices connected to the HDMI port. If there is a lot of
interference in the image, or if a problem occurs, such as no image
being projected, change the setting. |
| Reset Signal I/O
Settings
|
|
Resets all settings on the Signal I/O menu to their
default values |
