You can set
up security for your projector to use on a wireless network. Set up
one of the following security options to match the settings used on
your network:
- WPA2-PSK (Simple AP mode only)
- WPA3-PSK
- WPA2/WPA3-PSK
- WPA3-EAP
- WPA2/WPA3-EAP
Note: To set
up WPA3-EAP or WPA2/WPA3-EAP security, register your digital
certificate file and place it on a USB storage device for
connection to your projector.
- Press the Menu button.
- Select the Network menu
and press
Enter.
- Select Network Settings
and press Enter.
- Do one of the following:
- To connect directly to a wireless device
(Simple AP mode), select Passphrase, press Enter, and enter a passphrase from 8
to 63 characters long. When you are done, return to the
Network Settings screen, select
Set, and follow the on-screen
instructions to save your settings and exit the menus. Skip the
rest of these steps.
- To connect to a device via a wireless network
router (infrastructure mode), select the Wireless LAN menu and press Enter. Continue with the next
step.
- To connect directly to a wireless device
(Simple AP mode), select Passphrase, press
- Select the Security
setting and press Enter.
- Select the security settings for your network.
- Do one of the following
according to the security you selected:
- WPA3-PSK or WPA2/WPA3-PSK: Select Passphrase, press Enter, and enter a passphrase from 8 to 63 characters long. Then continue with step 9.
- WPA3-EAP or WPA2/WPA3-EAP: Select EAP Type and press Enter.
- Select the protocol for authentication as the EAP Type setting.
- When you are finished,
select Return and press
Enter to return to the Network Settings menu.
- Select Set, and follow the on-screen instructions to save your settings and exit the menus.
