Correcting Image Shape with the Keystone Buttons

You can use the projector's keystone correction buttons to correct the shape of an image that is unevenly rectangular on the sides.
Note: You can use the keystone buttons to correct the image up to 30° left, right, up, or down.
Note: If you change the Screen Type setting or adjust the image position, your image adjustments are reset.
  1. Turn on the projector and display an image.
  2. Press one of these keystone buttons on the control panel to display the Keystone adjustment screen.

  3. Press a keystone button on the projector's control panel to adjust the image shape.

    Note: The horizontal keystone adjustment buttons are labeled W and T.
    After correction, your image is slightly smaller.
    Note: If the projector is installed out of reach, you can also correct the image shape with the remote control using the H/V-Keystone settings in the projector menus.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use