Adjusting the Image Position Using Screen Position

You can adjust the image position if there are margins between the edge of the image and the projected screen frame.
Note: This feature is not available if you set the Screen Type setting to the same aspect ratio as the projector's native resolution.
  1. Turn on the projector and display an image.
  2. Press the Menu button on the control panel or remote control.
  3. Select the Installation menu and press Enter.


  4. Select Screen Position and press Enter.
  5. Use the arrow buttons on the remote control or projector to adjust the position of the image.


  6. When you are finished, press the Menu button.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use