Controlling a Networked Projector Using a Web Browser

Once you have connected your projector to your network, you can select projector settings and control projection using a compatible web browser. This lets you access the projector remotely.
Note: The web setup and control features support Microsoft Internet Explorer 11.0 or later, Microsoft Edge, Google Chrome, and Safari on networks that do not use a proxy server for connection. You cannot select all of the projector menu settings or control all projector functions using a web browser.
Note: If you set Standby Mode to Communication On in the Operation menu, you can use a web browser to select settings and control projection even if the projector is in standby mode (the power is off). The Standby Mode setting is displayed only if the A/V Output setting in the Signal I/O menu is set to While Projecting.
  1. Make sure the projector is turned on.
  2. Start your web browser on a computer or device connected to the network.
  3. Type the projector's IP address into the browser's address box and press the computer's Enter key (if you are entering an IPv6 address, wrap the address with [ and ]).
    Note: You can find the projector's IP address in the projector's Network menu or on the LAN input screen.
    Note: If you attempt to connect to the Web Control screen via a proxy server, the screen will not be displayed. Make a direct connection to the Web Control screen.
    Do not remove the USB flash drive from the projector or disconnect the projector's power cord when the Playlists or USB Memory Device screens are displayed in Content Playback mode. Data saved on the flash drive may be damaged.
    You see the Web Control screen.

    In normal mode:

    In Content Playback mode:

  4. To control projection remotely, select the Basic Control option from the Web Control screen.
    Note: If you see a log in window, enter your user name and password. (The default user name is EPSONREMOTE and the default password is guest.)
    You see a screen like this:

    1 Power button control
    2 Selects an HDMI port source
    3 Selects the Video port source
    4 Selects the USB Display source
    5 Selects the Screen Mirroring source
    6 A/V Mute button control
    7 Freeze button control
    8 Closed captioning control (not available in all countries)
    9 Displays a QR code for connecting with iOS or Android devices using the Epson iProjection app
    10 Volume button controls
    11 Selects the USB device source
    12 Selects the network source
    13 Selects a Computer port source
    14 Searches for connected sources
  5. Select the icon corresponding to the projector function you want to control.
  6. To select projector menu settings, select Advanced on the Web Control screen.
    Note: If you see a log in window, enter your user name and password. (The default user name is EPSONWEB and the default password is admin.)
  7. Select the name of the menu and follow the on-screen instructions.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use