can project from computers on your network, you must select the
network settings for the projector using its menu system.
sure you already connected the projector to your wired network
using the LAN port.
Turn on the projector.
Press the Menu
Select the Network menu
and press Enter.
Select Network Settings
and press Enter.
Select Projector Name and enter a name up to 16
alphanumeric characters long to identify the projector on a
Set the Priority Control Interface setting to
Select the Wired LAN
menu and press Enter.
Select IP Settings and
Select your IP settings as
network assigns addresses automatically, turn on the DHCP setting.
If you must set addresses manually, turn off
DHCP and enter the projector's
IP Address, Subnet Mask, and Gateway Address as needed.
highlight the numbers you want from the displayed keyboard, press
the arrow buttons on the remote control. To select a highlighted
number, press Enter. Alternatively, press and hold
the Num button on the remote
control while entering the desired numbers.
To prevent display of the IP address on the standby
screen, turn off IP Address
Display in the Wired LAN menu.
Select Return and press Enter to return to the Network
Select Network Projection and press Enter. You see a screen like
Set the Epson iProjection setting to On.
Select the following
options as necessary:
Display lets you display the SSID on the network information
screen and home screen.
Info lets you select how the projector displays network
information. You can select an option to display a QR code that
lets you quickly connect your iOS or Android devices using the
Epson iProjection app.
Password lets you enter a password up to 4 numbers long for
accessing the projector as a moderator with the Epson iProjection
(Windows/Mac) software or the Epson iProjection app. (No default
Display lets you select whether to display a projector
keyword on the projected image when accessing the projector using
Note: Use the
displayed keyboard to enter the password and keyword. Press the
arrow buttons on the remote control to highlight characters and
press Enter to select them.
When you finish selecting settings, select Return and press Enter to return the Network Settings menu.
Select Set, and follow the on-screen instructions to
save your settings and exit the menus.