If the "Not Supported" message appears, try the
following solutions:
- Make sure the correct input signal is selected on
the Signal I/O menu.
- Make sure
the computer's display resolution does not exceed the projector's
resolution and frequency limit. If necessary, select a different
display resolution for your computer. (See your computer manual for
details.)
- If you are projecting from an HDMI source, change
the HDMI EQ Setting setting in
the projector's Signal I/O menu.
- If you are projecting using a thumb-sized media
streaming device, set the HDMI EQ
Setting to 1 in the
projector's Signal I/O menu.