Fixed Installation
|
On
Off
|
Set to On if you
installed the projector in a fixed location |
Test Pattern
|
— |
Displays a test pattern to assist in focusing and
zooming the image and correcting image shape |
Setting Plate Installation
Guide
|
— |
Displays an on-screen guide to assist with installing
the projection screen when you have installed the projector on a
wall |
Vertical Installation
|
Yes
No
|
Set to Yes if you
installed the projector in a vertical position |
Projection
|
Front
Front/Upside Down
Rear
Rear/Upside Down
|
Selects the way the projector faces the screen so the
image is oriented correctly |
Auto Screen
Adjustment
|
— |
Automatically adjusts the image shape when corner
markers are placed on the projection surface |
Geometry Correction
|
H/V-Keystone
Quick Corner
Arc Correction
Point Correction
Memory
|
Adjusts image shape to rectangular (horizontally and
vertically)
H/V Keystone: lets
you manually correct horizontal and vertical sides
Quick Corner: select
to correct image shape and alignment using an on-screen display
Arc Correction:
select to adjust the curve or arc of the horizontal and vertical
sides
Point Correction:
select to divide the projected image into a grid and correct
distortion by moving a selected point
Memory: controls
memory functions for current image shape settings
- Save Memory: saves
the current image shape as a memory setting
- Load Memory: loads
a saved image shape memory
- Rename Memory:
renames a saved image shape memory
- Erase Memory:
deletes a saved image shape memory
- Reset Memory:
resets all the image shape memory settings
|
Digital Zoom
|
Varying levels available |
Adjusts the size of the projected image |
Image Shift
|
Varying positions available |
Adjusts the position of the projected image |
Connect ELPCB02
|
On
Off
|
Set to On to switch
the input source between the HDMI2 port and HDMI3 port each time you press the
HDMI2 button on the optional
interface box |
Touch Unit
|
Power
Touch Unit Setup
Touch Calibration
Calibration Range
|
Power: turns on the
Touch Unit power
Touch Unit Setup:
performs angle adjustment for laser diffusion
Touch Calibration:
performs calibration for finger touch operations
Calibration Range:
if finger touch operations are recognized as drag operations,
select Wide to widen the
calibration range |
Remote Receiver
|
Front/Rear
Front
Rear
Off
|
Limits reception of remote control signals by the
selected receiver; Off turns off
all receivers |
Projector ID
|
Off
1 through 9
|
Assigns an ID for the projector when you use multiple
projectors |
Screen Type
|
4:3
16:6 (BrightLink EB-735Fi)
16:9
16:10
|
Sets the aspect ratio to fit the image on the
projection surface |
Screen Position
|
Varying positions available |
Shifts the image position on the screen (only available
if the Screen Type setting is not
set to the same aspect ratio as the projector's native
resolution) |
High Altitude Mode
|
On
Off
|
Regulates the projector's operating temperature at
altitudes above 4921 feet (1500 m) |
Reset Installation
Settings
|
— |
Resets all settings on the Installation menu to their
default values except for the following:
|