Feature Settings - Operation Menu

Settings on the Operation menu let you customize various projector features that control its operation. The available settings depend on the currently selected input source and other settings.



Setting Options Description
Auto Source Search On

Off

Enables the projector to automatically select an input source
Light Source Brightness Control Maintain Brightness

Maintain Brightness Level

Estimated Remains

Light Source Mode

Brightness Level

Controls the constant brightness of the projector's light source

Maintain Brightness: maintains a constant brightness

Maintain Brightness Level: selects the brightness level to maintain when the Maintain Brightness setting is enabled

Estimated Remains: if the Maintain Brightness setting is enabled, displays the remaining number of hours the projector can maintain constant brightness

Light Source Mode: selects the brightness mode of the projector when the Maintain Brightness setting is disabled
  • Normal: maximum brightness
  • Quiet: 70% brightness with reduced fan noise
  • Extended: 70% brightness and extends the life expectancy of the light source
  • Custom: select a custom brightness level and enable use of the next setting

Brightness Level: select the Custom brightness level you want

Direct Power On On

Off

Controls whether the projector automatically turns on when you plug it in
Auto Power On HDMI1

Computer1

USB Display

Off

Selects whether to automatically turn on the projector when you connect an input signal to a specific input source; USB Display is only available when USB Display is enabled. Adjust the Power On Trigger setting to change the power on settings for the HDMI1 option.
Power On Trigger Plug-in Detection

Signal Detection

Selects the power on condition when Auto Power On is set to HDMI1:
  • Plug-in Detection: automatically turns on the projector when the device connected to the HDMI1 port is turned on
  • Signal Detection: automatically turns on the projector when it detects an HDMI video signal on the HDMI1 port; selecting this option increases standby power consumption
Sleep Mode On

Off

Automatically turns off the projector after an interval of inactivity
Sleep Mode Timer 1 to 30 minutes Sets the time before the projector automatically turns off (Sleep Mode must be turned on)
A/V Mute Timer On

Off

Automatically turns off the projector after 30 minutes of inactivity
Standby Mode Communication On

Communication Off

Enable this setting to allow monitoring and control of the projector over a network when the projector is in standby mode; this setting is only displayed when A/V Output is set to While Projecting in the projector's Signal I/O menu, Power On Trigger is set to Plug-in Detection in the projector's Operation menu, and Auto Power On is set to Off in the projector's Network menu.
Port Wired LAN

Wireless LAN

Selects the port to use while the Standby Mode setting is set to Communication On
Quick Startup Off

20min.

60min.

90min.

Sets the time period for which you want to be able to restart the projector within five seconds of turning it off (Quick Start mode).

It may take longer than five seconds when projecting from the projector's USB port or when using the Screen Mirroring features. This setting is only displayed when A/V Output is set to While Projecting in the projector's Signal I/O menu, Power On Trigger is set to Plug-in Detection in the projector's Operation menu, and Auto Power On is set to Off in the projector's Network menu.

Indicators On

Off

Enables or disables the status indicator lights on the projector
Inv Direction Button On

Off

Enable this setting if you want to invert the direction of the arrow buttons on the control panel to match the projector's installation position
Reset Operation Settings Reset all settings on the Operation menu to their default values
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use