Connecting to a Computer for Pen and Finger Use

If you connected your computer to a Computer or HDMI port on the projector, you also need to connect the USB cable so you can use the pens and your fingers with your computer.
Note: A Touch Unit is optional and must be installed for finger touch operation.
  1. Connect the USB cable to your projector's USB-B1 port.


    Note: If you are connecting to a mini PC attached to the optional wall mount, connect the USB cable to the projector's USB-B2 port. You can change the HDMI port associated with the USB-B2 port by changing the USB-B2 setting in the projector's Pen/Touch > PC Interactivity menu. Also connect the mini PC to one of the projector's HDMI ports.
  2. Connect the other end to any available USB port on your computer.
Parent topic: Connecting to Computer Sources
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use