Saving Settings to Memory and Using Saved Settings

You can save customized settings for each of your video inputs and then select the saved settings whenever you want to use them.
  1. Turn on the projector and display an image.
  2. Press the Menu button.
  3. Select the Memory menu and press Enter.
    You see this screen:


  4. Select one of the following options:
    • Load Memory: Overwrites your current settings with saved settings
    • Save Memory: Saves your current settings to memory (10 memories with different names are available)
      Note: A memory name that has already been used is indicated by a blue mark. Saving over a previously saved memory overwrites the settings with your current settings.
      Note: You can save the following settings:
      • Image menu settings for each color mode
      • Video Range and Overscan in the Signal I/O menu
      • Light Source Mode and Brightness Level in the Operation menu
      • Color Matching in the Multi-Projection menu
    • Erase Memory: Erases the selected memory settings
    • Rename Memory: Renames a saved memory
    • Reset Memory Settings: Delete all saved memory
  5. Press Esc to exit.
Parent topic: Adjusting Projector Features
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use