If the projected image is fuzzy or blurry, try the
following solutions:
Adjust the
image focus.
Clean the projection window.
Note: To
avoid condensation on the projection window after bringing the
projector in from a cold environment, let the projector warm up to
room temperature before using it.
Position
the projector close enough to the screen, and directly in front of
it.
Make sure your screen is flat. Try projecting on
another surface.
Verify that the throw distance from the projector to
your projection surface meets the specifications in your
projector's online Installation Guide.
Position
the projector so the keystone adjustment angle is not so wide that
it distorts the image.
Adjust the
Sharpness setting to improve
image quality.
If you are
projecting from a computer using a VGA cable, press the
Auto button on the remote control
to automatically adjust the tracking and sync. If any bands or
overall blurriness remain, display a uniformly patterned image on
the screen and manually adjust the Tracking and Sync settings.
If you are
projecting from a computer, use a lower resolution
or adjust the computer's resolution to match the projector's
native resolution, if possible.