If the projected image is too dark or light, or the
colors are incorrect, try the following solutions:
- Press the
Color Mode button on the remote
control to try different color modes for the image and
environment.
- Check your
video source settings.
- Adjust the available settings on the Image menu for
the current input source, such as Brightness, Contrast, Tint, White
Balance, Color Saturation
and RGBCMY.
- Make sure you selected the correct Signal Format or EDID setting in the Signal I/O menu, if
available for your video source.
- Set the Video
Range setting in the Signal I/O menu to Auto, if available for your image
source.
- Make sure
all the cables are securely connected to the projector and your
video device. If you connected long cables, try connecting shorter
cables.
- Position
the projector close enough to the screen.
- Make sure you have run the Light Source Calibration in the Management
menu recently. If using multiple projectors, perform the
calibration on all projectors to ensure a consistent image
quality.