Focusing the Image
Wait at least
30
minutes after you start projecting to adjust the focus.
Turn on the projector and display an image.
Press the
Menu
button.
Select the
Installation
menu and press
Enter
.
Select
Test Pattern
and press
Enter
.
Open the front cover.
Move the focus lever and adjust the focus using the center reference point of the projected screen.
Note:
You may see a different test pattern than the one shown above.
Once the center reference point is in focus, check that the corner reference points are also in focus.
Note:
If any areas are out of focus, use the focus lever to adjust the focus until the corners appear the same.
To remove the test pattern, press
Esc
.
Parent topic:
Using Basic Projector Features
Was this page helpful?
Yes
or
No
.
Privacy Policy
|
Your California Privacy Rights
|
Terms of Use