Selecting Screen Mirroring Settings

You can select Screen Mirroring settings for your projector and then project images from your mobile device.
  1. Press the Menu button.
  2. Select the Management menu and press  Enter.


  3. Set the Wireless LAN Power setting to On.
  4. Select the Network menu and press  Enter.


  5. Select Network Settings and press  Enter.
  6. Select Priority Control Interface and press  Enter.
  7. Choose one of the following options:
    • If you are casting images over a wired LAN, select Wired LAN.
    • If you are casting images wirelessly directly or via a wireless network router, select Wireless LAN.
  8. Set the Simple AP setting to On.
  9. Select Network Projection and press  Enter.
  10. Set the Screen Mirroring setting to On.
  11. Select these settings as necessary:
    • Interrupt Connection lets you switch the screen to another device while projecting using Screen Mirroring. If you want to connect two Screen Mirroring sources at once, select Off.
    • Adjust Image Quality lets you adjust the screen mirroring speed and quality. Select a small number to improve the quality or a large number to increase the speed.
    • Screen Mirroring Info displays connection information when projecting from a Screen Mirroring source.
  12. When you finish selecting settings, select Return and press  Enter to return to the Network Settings screen.
  13. Select Set, and follow the on-screen instructions to save your settings and exit the menus.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use