| The ReadyPrint service is unavailable due to a
connection issue. |
Make sure the product is connected to a network with
Internet access. |
| The ReadyPrint service is unavailable due to an account
issue. Error code: XXXXXX |
There may be an issue with your ReadyPrint account. Log
in to your account to review its status. |
| Printer is offline. Check the network connection and
connect to the Internet to maintain the ReadyPrint service. |
The product has not been connected to the Internet for
an extended period of time. Make sure the product is connected to a
network with Internet access. |
| Printer error. Turn the power off and on again. If the
problem persists, contact Epson Support. |
Turn the product off and then back on again. If the
error persists, check for and remove any jammed paper or protective
materials from the product. If the error still persists, contact
Epson for support. |
| Printer error. Contact Epson Support. Non-printing
features are available. |
The product may be damaged, but features such as
scanning are still available. Contact Epson for support. |
| Printer error. For details, see your
documentation. |
The product may be damaged. Contact Epson for
support. |
| Paper out in XX. Load paper. Paper Size: XX/Paper Type:
XX |
Load the size and type of paper in the indicated paper
source. |
| The printer's borderless printing ink pad is nearing
the end of its service life. It is not a user-replaceable part.
Please contact Epson support. |
The ink pad is near the end of its service life and the
message will be displayed until the ink pad is replaced. Contact
Epson for support. (To resume printing, press OK.) |
| The printer's borderless printing ink pad has reached
the end of its service life. It is not a user-replaceable part.
Please contact Epson support. |
The ink pad is at the end of its service life. Turn
off the product and contact Epson for support.
You can still perform operations that do not use ink,
such as scanning.
|
| Paper Setup Auto Display is set to Off. Some features
may not be available. For details, see your documentation. |
AirPrint is not available when the Paper Setup Auto Display setting is turned
off. Change the Paper Setup Auto
Display setting to On. |
| No dial tone detected. |
Make sure the phone cable is connected correctly and
the phone line works. If you connected the product to a PBX
(Private Branch Exchange) phone line or Terminal Adapter, change
the Line Type setting to
PBX. Use a # (hash) instead of
the actual access code when entering an outside fax number. This
makes the connection more secure. If you still cannot send a fax,
turn off the Dial Tone Detection
setting. (Turning off the Dial Tone Detection setting may cause the
product to drop the first digit of a fax number.) |
| Failed to receive faxes because the fax data capacity
is full. Touch the Job/Status at the bottom of the Home Screen for
details. |
Press the  Job/Status button, select Printer Status, and resolve any printer
errors that prevented faxes from printing. Make sure the product is
connected to a computer or that an external USB device is connected
to the product. |
| The combination of the IP address and the subnet mask
is invalid. See your documentation for more details. |
Contact your product administrator. |
| To use cloud services, update the root certificate from
the Epson Web Config utility. |
Contact your product administrator. |
| Check that the printer driver is installed on the
computer and that the port settings for the printer are
correct. |
On a Windows computer, go to Control Panel > Hardware and Sound > Devices and Printers. Right-click the printer
and select Printer Properties.
Make sure the printer port is selected correctly in the
Ports tab. Select the
USBXXX setting for a USB
connection or EpsonNet Print Port
for a network connection. |
| Recovery mode |
Contact your product administrator. |