Loading Plastic and Laminated Cards in the
Input Tray
You can
load plastic and laminated cards that meet the card specifications
in the input tray.
Open the
input tray, pull out the output tray, and open the stopper. Do not
pull out the extensions.
Slide
the input tray edge guides all the way out.
Load
plastic or laminated cards printed side down and long edge first
into the input tray horizontally, and slide them in until they meet
resistance.
Note: Do not load
plastic cards vertically.
Slide
the edge guides against the edges of the card.
Turn off the Detect Double Feed setting on the Main Settings
tab in Epson Scan 2 when scanning the cards.
Note: If you do
not disable the Detect Double Feed
setting and a double feed error occurs, remove the plastic or
laminated card from the input tray and reload it. Press the
double feed detection skip button
to disable the Detect Double Feed feature and scan again.