| The ! error light is flashing
slowly |
A paper jam or a double feed has occurred.
Remove any paper loaded in the input tray. If the light continues
to flash, a scanner error may have occurred. Turn the scanner off
and then back on again. If the error continues, contact Epson for
support. |
| The ! error light is on |
The scanner cover is open. Make sure the
scanner cover is closed and there is no jammed paper inside. |
The following lights are flashing
quickly:
- ! error
 ready
 AP mode (ES-500W II) Wi-Fi (ES-500W II) |
A fatal error has occurred. Try the following:
- Check the
scanner connection to your computer to make sure it is secure.
- Turn the
scanner off and then back on again. If the error continues, the
scanner may be malfunctioning. Contact Epson for support.
|
The ready light is off and the
following lights are on:
- ! error
 automatic feeding mode
 double feed detection skip
 slow mode
- AP mode (ES-500W II)
- Wi-Fi (ES-500W II)
|
The firmware update has failed and the scanner
is in recovery mode. Try updating the firmware again. |
| The Wi-Fi and ! error lights are flashing slowly
(ES-500W II) |
An access point settings
error (security error) has occurred. Press the  stop button to clear the
error, restart the devices you want to connect to the network, then
reconnect to the network. |
| The Wi-Fi light is flashing
slowly and ! error
light is on (ES-500W II) |
| The Wi-Fi (white) and
! error lights are
flashing slowly (ES-500W II) |
A network connection error has occurred (the
date and time have not been set correctly). Reset the date and time
in Web Config. |
