You
can set up network scanning to your scanner through a direct
connection to your scanner.
First, manually configure your scanner to connect to your
network. Then follow the instructions here to set up your computer
for network scanning using the Epson Scan 2 Utility. Your scanner
must be turned on and connected to the network.
Note: Make a note
of the IP address or host name of the scanner so you can enter it
in these steps.
Do one
of the following to start the Epson Scan 2 Utility:
Windows 10: Click > EPSON > Epson Scan 2
Utility.
Windows 8.x: Navigate to the Apps screen and select Epson Scan 2 Utility.
Windows (other versions): Click or
Start > All Programs or Programs > EPSON > Epson Scan
2 > Epson Scan 2
Utility.
Mac: Open the Applications folder, click Epson Software, and click Epson Scan 2 Utility.
Select
Settings from the Scanner drop-down
list. You see a screen like this:
Note: If you see
an Enable Editing button (Windows)
or the lock icon (Mac), click it so that you can modify the scanner
settings.
Select
your scanner and click Add.
You see a screen like this:
Do one
of the following:
Under
Search for Network, select the IP
address of your Epson scanner and click Add.
Select the
Enter address setting, type in the
IP address or host name of your Epson scanner, and click
Add.
Click
OK to check the connection.
You see a confirmation message.
Click
OK to save your settings and close
the Epson Scan 2 Utility.