Scanning Two Originals onto One Sheet (Stitching Images) - Windows

You can scan both sides of a double-sided or folded original in Document Capture Pro and combine them into a single image with the Epson Scan 2 Stitch Images setting (not available for all products).
Note: Settings may vary depending on the software version you are using. Click the Help icon in Document Capture Pro at any time for more information.
  1. Load your original in the product.
    Note: If an optional carrier sheet is included with your product, use it when scanning a folded original or damage to the original may occur. Place the original into the carrier sheet with the folded edge against the right side of the carrier sheet. Make sure to insert the carrier sheet into your product with the white edge facing down.
  2. Do one of the following to start Document Capture Pro:
    • Windows 10: Click and select Epson Software > Document Capture Pro.
    • Windows 8.x: Navigate to the Apps screen and select Document Capture Pro.
    • Windows (other versions): Click or Start and select All Programs or Programs. Select Epson Software > Document Capture Pro.
  3. Select the Simple Scan tab. You see a window like this:


  4. Click Scan Settings > Detailed Settings. You see an Epson Scan 2 window like this:


  5. Select Double-Sided as the Scanning Side setting.
  6. Select the original document size or Auto Detect as the Document Size setting.
  7. Select one of the following as the Stitch Images setting:
    • Top & Bottom: Places the scanned images one above the other.
    • Left & Right: Places the scanned images side by side.
  8. Select the Advanced Settings tab and verify that the Edge Fill setting is set to None.
  9. Click Save.
  10. Click OK.
  11. Click SCAN double-sided. Your product scans the original and the image appears in the Edit Scanned Results window.
    Note: If the scanned images are not stitched together in the correct orientation, click Scanning Side on the Epson Scan 2 window, select Settings, set the Binding Edge to Left or Top, and rescan the document.
  12. Review and edit the scanned pages as necessary and click Next when you are finished.
  13. Select a destination and any settings as necessary and click Complete.
Parent topic: Scanning Special Projects