Setting | Options | Description |
---|---|---|
Connection Mode | Quick
Advanced |
Selects the type of wireless connection
Quick: lets you directly connect to multiple devices and computers using the projector's wireless network; requires the optional wireless LAN module Advanced: lets you connect to multiple smartphones, tablets, or computers via a wireless network access point |
Search Access Point | To Search View | Search for available wireless network access points in Advanced connection mode |
SSID | Up 32 alphanumeric characters | Sets the SSID (network name) of the wireless LAN system the projector is connecting to |
Security | Open
WPA3-PSK WPA2/WPA3-PSK WPA3-EAP WPA2/WPA3-EAP |
Selects the type of wireless security used in the
wireless network (some options are only available when the
Connection Mode setting is set to
Advanced)
Note: EAP and
PEAP security are only available on PowerLite 992F/1288. |
Passphrase | Between 8 to 63 alphanumeric characters | Enter a paraphrase for the wireless network |
EAP Method | EAP Type
User name Password Client Certificate Verify Server Cert. CA Certificate RADIUS Serv. Name |
Sets the EAP for WPA2-EAP and WPA/WPA2-EAP security
Note: EAP and
PEAP security are only available on PowerLite 992F/1288. |
Channel | Various channels available | In Quick connection mode, selects the frequency band (channel) used by the wireless LAN |
IP Settings | DHCP
IP Address Subnet Mask Gateway Address |
Turns on DHCP if your network assigns addresses automatically; set to Off to manually enter the network's IP Address, Subnet Mask, and Gateway Address |
SSID Display | On
Off |
Selects whether to display the SSID on the network standby screen and the Home screen |
IP Address Display | On
Off |
Selects whether to display the IP address on the network standby screen and the Home screen |
IPv6 Settings | IPv6
Auto Configuration Use Temporary Address |
Selects the IPv6 settings when you connect the projector to the network using IPv6 |