Correcting Image Shape with Quick Corner

You can use the projector's Quick Corner setting to correct the shape and size of an image that is unevenly rectangular on all sides.
Note: To provide the best possible image quality, adjust the projector's position to correct the image shape. If this isn't possible, use the Quick Corner setting to correct the image shape.


Note: You cannot combine Quick Corner correction with other image shape correction methods.
  1. Turn on the projector and display an image.
  2. Press the  Settings button on the projector remote control.
  3. Press the arrow buttons to select the Settings menu and press Enter.


    Note: You can also press the  keystone button on the projector remote control to display the Keystone adjustment screen.
  4. Select the Installation setting and press Enter.
  5. Select the Keystone setting and press Enter.
  6. Select the Quick Corner setting and press Enter twice. You see the Quick Corner adjustment screen:


  7. Use the arrow buttons on the projector remote control to select the corner of the image you want to adjust, then press Enter.
  8. Press the arrow buttons to adjust the image shape as necessary, then press Enter to return to the area selection screen.
    Note: To reset your adjustments, press and hold the  Esc button for at least 2 seconds to display a reset screen, then select Reset Quick Corner and Yes.
  9. Press the  Settings button to exit the menu or the  Esc button to return to the previous screen.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use