Turn
on the projector before you turn on the video source you want to
use.
Caution:
Do not turn on the video source before
connecting it to the projector; otherwise, you may damage the
projector.
- Connect the AC adapter to the projector's power inlet.
- Plug the power cord into an electrical outlet and connect it to the AC adapter The projector enters standby mode. This indicates that the projector is receiving power, but is not turned on.
-
Press the
power button on the
projector or the projector remote control to turn on the
projector. The status light flashes blue as the projector
warms up. After the projector is warmed up, the status light stops
flashing and turns blue.
Warning: Never look into the projector lens when the light is on. The light can damage your eyes and is especially dangerous for children and pets.Caution:Make sure no objects are blocking the light from the projector lens. Objects blocking the lens for an extended time can melt and light that is reflected back into the lens can cause the projector to malfunction.
Settings