Using the Projector as a Bluetooth Speaker

You can use the projector's speakers to output audio from a compatible device connected by Bluetooth.
Note: Bluetooth audio devices are not supported in some countries and regions. You cannot connect multiple audio/video devices by Bluetooth at the same time. You may not be able to connect depending on type of device and its Bluetooth standards. Several attempts may be required before pairing is successful. Even when connecting within the specified communication distance, connections can be lost due to the signal status.
  1. Press the  Bluetooth Speaker mode button on the projector or remote control to turn on Bluetooth Speaker mode. You see a confirmation on the screen.
  2. Enable the Bluetooth function on the device you want to connect to and select Projector from the available device list. See the documentation for the connected device for more information.
    Note: There is a delay in the audio output from any Bluetooth audio device. If you want to temporarily turn off the projected image, press the  Blank button on the projector or remote control. To cancel a Bluetooth connection, disconnect from the connected device.
  3. To exit Bluetooth Speaker mode, press the  Bluetooth Speaker mode button again.
    Note: While the projector is in Bluetooth Speaker mode, you can connect input devices such as smartphones or tablets, but you cannot pair output devices such as headphones or external speakers. If you are having trouble pairing speakers or headphones, make sure the Bluetooth Speaker mode is disabled.
    You see a confirmation on the screen.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use