Loading a CD/DVD

You can print on any compatible, ink jet-printable CDs or DVDs, including Blu-ray Discs.
Caution:
Do not insert the CD/DVD tray while the product is printing, copying, or performing other operations. Otherwise, your product may be damaged or the surface of the CD/DVD may become dirty or scratched.
Note: If you are using discs where the printable area extends to within 0.16 inch (4 mm) of the center hole, you may need to adjust the inner diameter setting using the control panel or Epson Photo+ software.
  1. Burn your files, music, or video onto your disc before printing on it.
  2. Select the  home icon, if necessary.
  3. Select Output Tray to close the output tray, if necessary.
  4. Remove the CD/DVD tray from beneath Cassette 2 (lower).


  5. When prompted to load a CD/DVD, you can select the option to view an animation of the loading procedure. Follow the on-screen instructions to load the disc into the CD/DVD tray.
    Note: Be sure to fully seat the CD or DVD or it may fall out when the tray is turned over.


    Caution:
    Do not turn off the product with a CD or DVD loaded in it. Always remove the disc first.
After your CD or DVD is printed, the tray extends automatically. Remove it from your product, remove the CD or DVD from the tray, and select Printing Complete on the LCD screen. Make sure you insert the CD/DVD tray into the storage slot beneath Cassette 2 when you're finished.
Caution:
Always remove the CD/DVD tray after printing. If you turn the product off and on again or perform a head cleaning without removing the tray, the print head may contact the CD/DVD tray and cause the product to malfunction. After printing, handle the CD or DVD carefully. You may need to wait up to 24 hours for the ink to dry fully before inserting it in a drive, depending on the type of disc you used. Keep printed discs away from moisture and direct sunlight.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use