You
can place originals up to this size on the scanner glass:
Letter (8.5 × 11 inches
[216 × 279 mm]) or A4
(8.3 × 11.7 inches
[210 × 297 mm]).
Open the
document cover.
Note: If there is
any dust or dirt on the scanner glass, the scanning range may
expand to include it, so the image of the original may be displaced
or reduced. Remove any dust and dirt on the scanner glass before
scanning.
Place
your original facedown on the scanner glass with the top facing
into the corner. Slide the original to the edges of the indicated
corner.
Note: You can
place multiple originals on the scanner glass. Just make sure
they are at least 0.2 inch (4.5 mm) away from the edge of
the scanner glass and at least 0.8 inch (20 mm) away from each
other.
Note: The edges of
your original may be cropped by 0.06 inch (1.5 mm) from the edge of
the scanner glass. Manually position your original away from the
edges to prevent cropping.
Note: When placing
bulky originals such as books, prevent exterior light from shining
directly onto the scanner glass.
Close
the document cover gently to keep your original in place.
Caution:
Do not push down on the document cover or
scanner glass or you may damage the product.
Remove your originals after
scanning. If you leave the originals on the scanner glass for a
long time, they may stick to the glass surface.