| Display
|
Messages
Display Background
Startup Screen
Standby Confirmation
Color Uniformity
|
Selects various message display options
Messages: controls
whether messages, such as projector ID, no signal, warnings, and
source name, are displayed on the screen
Display Background:
sets what content to display when no signal is received
Startup Screen:
controls whether a special screen appears when the projector logo
starts up
Standby
Confirmation: controls whether a confirmation screen appears
when the projector is powered off
Color Uniformity:
adjusts the color tone balance
Not available when the Color Mode is set to
Dynamic in the projector's
Image menu.
- Adjustment Level:
set the adjustment level.
- Start Adjustments:
select the area for which you want to adjust the color tone for
red, green, and blue individually.
|
| User's Logo
|
— |
Creates a custom image or logo screen that the
projector displays to identify itself and enhance security |
| Projection
|
Front
Front/Ceiling
Rear
Rear/Ceiling
|
Selects the way the projector faces the screen so the
image is oriented correctly |
| Operation
|
Direct Power On
High Altitude Mode
Auto Power On
Indicators
Startup Source
HDMI EQ Setting
Advanced
Date & Time
|
Selects various operation options
Direct Power On:
lets you turn on the projector without pressing the power button by
plugging in to ac outlet
High Altitude Mode:
regulates the projector’s operating temperature at altitudes above
4921 feet (1500 m)
Auto Power On: if
this is set to HDMI, the projector turns on when a signal is
received from the HDMI port, even when the projector is in standby
mode
Indicators: turns
the projector panel's Status lights on or off
Startup Source:
select the input source you want to display from when the projector
is turned on
HDMI EQ Setting:
change the HDMI reception level of the video source connected to
the HDMI port if there is no image or noise in the image
Advanced: select
All as the Batch Setup Range setting to copy all of the
projector menu settings using the batch setup feature. Select
Limited, if you do not want to
copy the following settings: Password Protection settings, Network
menu settings.
Date & Time:
adjusts the projector's date and time settings
- Daylight Savings
Time: enables daylight savings time
- Internet Time:
updates the time automatically via an online time server
|
| Standby Mode
|
Standby Mode
Port
|
Selects the following when the projector is in standby
mode (turned off):
Standby Mode:
Communication On indicates that
the projector can be monitored and controlled over a network when
the projector is in standby mode; enable this setting to monitor
and control the projector over a network when the projector is in
standby mode
When monitoring or controlling the projector using
wireless LAN, set Connection Mode
to Advanced
Port: selects the
Wired LAN or Wireless LAN port to use while the
Standby Mode setting is set to
Communication On |
| DC Out (2.0A)/GPI In
Settings
|
DC Out/GPI In
|
Select which operation to execute depending on the
input signal from the device, such as when an external sensor is
connected to the DC Out (2.0A)/GPI
In port.
DC Out/GPI In:
enables or disables GPI-1
Settings and GPI-2
Settings. Set to Always
On/On to enable the GPI settings. Also, set to Always On/On to keep the external sensor
device operating and continue supplying power to the streaming
media player when the projector is not projecting images. This lets
the device start earlier, or perform updates automatically over a
network if necessary. Set to Off
to continue using the USB port for power. |
| DC Out (2.0A)/GPI In
Settings (continued) |
GPI-1 Settings
GPI-2 Settings
GPI Info.
|
GPI-1
Settings/GPI-2 Settings:
set the operation to be executed when the sensor signal exceeds or
falls below a certain voltage. Select the Low -> High setting to select the
operation for when the sensor signal exceeds a certain voltage.
Select the High -> Low setting
to select the operation for when the sensor signal falls below a
certain voltage.
- Favorite
Playlists: set which playlist to play when you have selected
the Start Playlist setting
- Source: set the
image source when you have selected the Source Select setting
- Combination: set
the settings for the combination of GPI-1 and GPI-2 signals
- Hold High/Hold
Low: set how long the High or Low signal is held before
executing the selected operation
GPI Info.: displays
the current value for GPI-1 and GPI-2 |
| Multi-Projection
|
Multi-Projection
Projector ID
Color Mode
Color Uniformity
Edge Blending
Scale
Brightness Settings
Color Matching
Reset
|
Selects the following when you use multiple projectors:
Multi-Projection:
matches the display settings of multiple projectors; automatically
turns off Dynamic Contrast and changes the Brightness Setting to
Custom
Projector ID:
assigns an ID for the projector when you use one remote to control
multiple projectors
Color Mode: adjusts
the vividness of image colors for various image types and
environments
Color Uniformity:
adjusts the color tone balance
Edge Blending:
corrects a border between multiple images to create a seamless
screen
Scale: adjusts and
crops the size and position of the image displayed by each
projector
Brightness Settings:
selects the brightness mode of the projector
Color Matching:
corrects the difference in tint and brightness for each projected
image
Reset: resets all of
the Multi-Projection settings to their default values |
| Schedule Settings
|
Schedule
Schedule Reset
Setup Complete
|
Schedules projector events to occur automatically at
selected dates and times |
| Language
|
Various languages available |
Selects the language for projector menu and message
displays |
| Reset
|
— |
Resets all adjustment values on the Extended menu to
their default settings |
