Keystone
|
H/V Keystone
Quick Corner
|
Adjusts image shape to rectangular (horizontally and
vertically)
H/V Keystone: lets
you manually correct horizontal and vertical sides
Quick Corner: select
to correct image shape and alignment using an on-screen
display |
Volume
|
Varying levels available |
Adjusts the volume of external speakers connected to
the projector |
Bluetooth
|
Search Bluetooth
Device
Bluetooth Audio
Connected Device
|
Selects various Bluetooth settings
Search Bluetooth
Device: searches for available Bluetooth audio devices and
lists them
Bluetooth Audio:
enables or disables audio output to Bluetooth audio devices
Connected Device:
displays information on the connected Bluetooth audio
device |
Brightness Settings
|
Light Source Mode
Brightness Level
|
Selects the brightness mode of the projector laser
Light Source Mode:
sets the brightness for the laser:
- Normal: sets the
maximum brightness level
- Quiet: reduces
laser brightness to 50% with reduced fan noise
- Extended: reduces
laser brightness to 50% and saves power and laser life
- Custom: allows you
to select a custom brightness level
Brightness Level:
allows you to select a custom brightness level when your
Light Source Mode is set to
Custom |
Remote Receiver
|
On
Off
|
Turns off reception of remote control signals by the
receiver
To reset this setting to On, press and hold the Menu button on the remote for about 15
seconds. |
User Button
|
Light Source Mode
Multi-Projection
Info
Display the QR Code
Messages
Brightness Level
|
Assigns one of the menu functions to the User button on the remote control for
one-touch access |
Test Pattern
|
— |
Displays a test pattern to assist in focusing and
zooming the image and correcting image shape |
Content Playback
|
Overlay Effect
SD Viewer
|
Selects playlists and effects for projection
Overlay Effect:
select On to apply Color Filter, Lightness, and Shape Filter settings
Note: Overlay
Effect cannot be set when Edge
Blending is set to On,
when the source is the SD memory slot and a non-writable error has
occurred, or when the source is an SD player and the playlist
cannot be played.
SD Viewer: select a
playlist from the SD card |
Reset
|
— |
Resets all the adjustment values back to their default,
except the User Button
function |