If the "No Signal" message appears, try the
following solutions:
- Press one of the source buttons (Spotlight, HDMI, LAN,
or SD) on the remote control to
switch to the correct image source, if necessary.
- Turn on
the connected computer or video source, and press its play button
to begin your presentation, if necessary.
- Check the
connection from the projector to your video sources.
- If you are
projecting from a laptop computer, make sure it is set up to
display on an external monitor.
- If
necessary, turn the projector and the connected computer or video
source off and then on again.
- If you are projecting from an HDMI source, replace
the HDMI cable with a shorter one.
- Check that the SD card is inserted correctly.
- Try a different video cable.
- If the
other solutions do not solve the problem, reset all of the
projector settings using the options on the Reset menu.