Aligning the Print Head Using the Product Control Panel

You can align the print head using the control panel on your product.
  1. Make sure there are no errors on the LCD screen and the output tray is extended.
  2. Load a few sheets of plain paper in the product.
  3. Press the  home button, if necessary.
  4. Select Maintenance > Print Head Alignment.
  5. Do one of the following:
    • Select Vertical Alignment.
    • Select Horizontal Alignment.
  6. Press the OK button to print an alignment sheet.
    Note: Do not cancel printing while you are printing a head alignment pattern.
  7. Check the printed pattern and select the number representing the most solid printed pattern for each set on the LCD screen.

    Vertical Alignment





    Horizontal Alignment



  8. Press the OK button when you are finished.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use