Network Interface Specifications

Wi-Fi

Standard IEEE802.11 b/g/n; IEEE802.11n available only on the 20 MHz channel
Security WEP (64/128 bit)

WPA-PSK (TKIP)

WPA2-PSK (AES); complies with WPA2 with support for WPA/WPA2 Personal

WPA3-SAE (AES)

Frequency band 2.4 GHz
Connection modes Infrastructure mode

Wi-Fi Direct (Simple AP); not supported for IEEE802.11b

Note: Wi-Fi Direct can be used simultaneously with Infrastructure or Ethernet modes.
Maximum radio frequency power transmitted 20 dBm (EIRP)

Ethernet

Standard IEEE802.3i (10BASE-T); use a category 5e or higher STP (shielded twisted pair) cable to prevent risk of radio interference

IEEE802.3u (100BASE-TX)

IEEE802.3az (Energy Efficient Ethernet); connected device should be IEEE802.3az compliant

Communication modes Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full duplex, 100Mbps Half duplex
Connector RJ-45

Security

Security protocol SSL/TLS; HTTPS Server/Client, IPPS

SNMPv3

Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use