Setting Up Wireless Printing from a Smartphone or Tablet

You can use the Epson Smart Panel app to connect your Epson product to a wireless network or connect your device directly to the product. Epson Smart Panel is available on iOS and Android devices.

Make sure you have the following:

Note: Your device must be close enough to the product to create and maintain a Bluetooth connection.
  1. Make sure the product is turned on and is ready to print.
    Note: You must perform initial setup and ink installation before setting up wireless printing.
  2. Open the Epson Smart Panel app on your device.
  3. Do one of the following:
    • If the app automatically recognizes the product, follow the on-screen instructions to set up the wireless connection.
    • If the app does not automatically recognize the product, select the + icon and continue with the next step.
  4. On the next screen, select Start setting up and follow the on-screen instructions.
    Note: If your product is not listed, move closer to the product and try again. If the product is still not shown, connect your printer to the wireless network using the control panel and then select Connect Smartphone to Product Already Connected to Wi-Fi in the Epson Smart Panel app and follow the on-screen instructions. See the link below for wireless setup instructions.
Your product is now connected to a wireless network and set up for use with the Epson Smart Panel app.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use