Saving a User's Logo Image to Display

You can transfer an image to the projector and then display it whenever the projector turns on. You can also display the image when the projector is not receiving an input signal or when you temporarily stop projection. This transferred image is called the User's Logo screen.

The image you select as the User's Logo can be a photo, graphic, or company logo, which is useful in identifying the projector's owner to help deter theft. You can prevent changes to the User's Logo by setting up password protection for it.

Note: You cannot save an image that is protected by HDCP as a User's Logo.

Note: When you copy the menu settings from one projector to another using the batch setup feature, the user logo is also copied. Do not include any information in the user logo that you do not want to share between multiple projectors.

Display the image you want to project as the User's Logo.
Press the Menu button, select the Management menu, and press Enter.
Select the User's Logo setting and press Enter.
Select Start Setting and press Enter. You see a prompt asking if you want to use the displayed image as a user's logo.
Note: When you select User's Logo, adjustments such as Geometry Correction, E-Zoom, Aspect, and Screen Type are temporarily canceled.
Select Yes and press Enter.
Note: Depending on the image signal, the screen size may change to match the resolution of the image signal.
Make sure the image appears as you want it, then select Yes again and press Enter. You see a completion message.
Press Esc to exit the message screen.
Select the Display menu and press Enter.
Select when you want to display the User's Logo screen:
- To display it whenever there is no input signal, select No-Signal Screen and set it to Logo.
- To display it whenever you turn the projector on, select Startup Screen and set it to On.

To prevent anyone from changing the User's Logo settings without first entering a password, set a password and enable User's Logo security.