User Button
|
Light Source
Mode
Information
Deinterlacing
Closed Caption
Resolution
Mic Input Level
Pattern Display
Display LAN Info.
|
Assigns a menu option to the User button on the remote control for one-touch
access |
User's Logo
|
Start Setting
Reset
|
Creates the screen that the projector displays
to identify itself and enhance security |
User Pattern
|
— |
Captures a projected screen and saves it as a
pattern for display; select Pattern
Display in the Display menu to display the saved
pattern |
Control Panel
Lock
|
Full Lock
Except for Power
Off
|
Controls projector button locking to secure the
projector
Full Lock: locks all buttons
Except for Power: locks all
buttons except the power button
Off: no buttons locked |
Color Uniformity
|
Color Uniformity
Adjustment Level
Start Adjustments
Reset
|
Adjusts the color tone balance
Color Uniformity: set to
On to adjust the color tone balance
for the whole screen
Adjustment Level: sets the
adjustment level
Start Adjustments: adjusts the
red, green, and blue color tones individually for the selected
area
Reset: resets all Color
Uniformity adjustment values to their defaults |
Refresh Mode
|
Timer
Messages
Start
|
Select Start to
clear an afterimage that remains in the projected image and turn
off the projector after the time specified in the Timer screen. Press any button to cancel Refresh
Mode. Enable the Messages setting if
you want to display a message when Refresh Mode is in
progress. |
Light Source
Calibration
|
Run Now
Run Periodically
Last Run
|
Selects options to perform light source
calibration to maintain the color balance of the projected image
Run Now: Select On to start light source calibration now. Make
sure the projector has been turned on for at least 30 minutes for
maximum accuracy. You may not be able to start calibration if the
projector's environmental temperature is out of range.
Run Periodically: Select
On to perform calibration every 100
hours of usage
Last Run: Displays the date and
time light source calibration was last performed |
Date & Time
|
Date & Time
Daylight Saving Time
Internet Time
|
Adjusts the projector's date and time
settings
- Date & Time: sets the date
and time on the projector
- Daylight Saving Time: enables
daylight saving time
- Internet Time: updates the time
automatically via an online time server
|
Schedule
Settings
|
— |
Schedules projector events to occur
automatically at selected dates and times |
Wireless LAN
Power
|
On
Off
|
Enables or disables wireless communication |
Wireless LAN
Diagnosis
|
Ping
IP Address
Ping until stopped
Start
|
Displays the status of the wireless LAN
communication |
Log Save
Destination
|
Internal Memory
USB and Internal Memory
|
Selects where you want to save projector error
and operation log files |
Batch Setup
Range
|
All
Limited
|
Selects which projector menu settings to copy
using the batch setup feature; select All to copy all the settings, or select
Limited to copy all settings except
for the following:
- Password Protection
settings
- Network menu settings
|
Language
|
Various languages available |
Selects the language for projector menu and
message displays |
Information
|
Operation Hours
Light Source Hours
Estimated Remains
Source
Input Signal
Resolution
Refresh Rate
Sync Info
Video Signal
Status
Serial Number
Event ID
Version
|
Displays information about the projector and
current input signal; the displayed items vary depending on the
current input source
The Version option displays
version numbers for the projector and other components |
Display Logs
|
Temp Warning
Info
Power On/Off History
|
Displays log data saved to the location
specified in the Log Save
Destination setting |
Reset Management
Settings
|
— |
Resets all settings on the Management menu to
their default values except for the following:
|