Input Signal Settings - Signal I/O Menu

Normally the projector detects and optimizes the input signal settings automatically. If you need to customize the settings, you can use the Signal I/O menu. The available settings depend on the currently selected input source.



To change settings for an input source, make sure the source is connected and select that source.

Setting Options Description
Volume Varying levels available Adjusts the volume of the projector's speaker system or external speakers
Source Signal Format

Mic Input Level

Overscan

Reset to Defaults

Displays settings selected for the current input source
Signal Format: sets the signal type and video range for certain input sources
  • Video Signal: specifies the signal type from input sources connected to video ports; if interference appears or no image appears when set to Auto, select the appropriate signal type
  • Video Range: sets the video range to match the setting of an input source connected to the HDMI ports

Mic Input Level: adjusts the volume from a microphone when audio is not output to an audio/visual system; when the Mic Input Level setting is turned up, the volume of the other connected device is turned down, and when the Mic Input Level is turned down, the volume of the other connected device is turned up

Overscan: changes the projected image ratio to make the edges visible by a selectable percentage or automatically when projecting a component signal

Reset to Defaults: resets all settings for the current input source

A/V Output While Projecting

Always On

Determines when the projector outputs audio and images to external devices; set to Always On to output audio and images when the projector is in standby mode
Audio Output Auto

Audio1

Audio2

Audio L/R

Sets the audio input port when projecting from input sources other than HDMI, LAN, and Screen Mirroring
HDMI Audio Output HDMI1 Audio Output

HDMI2 Audio Output

Sets the audio input port when projecting from one of the HDMI ports
Monitor Out Port Monitor Out

Computer2

Selects the function of the Computer2/Monitor Out port

Monitor Out: select this option when outputting an image signal to an external monitor

Computer2: select this option when inputting an image signal from a computer

HDMI Link Device Connections

HDMI Link

Audio Out Device

Power On Link

Power Off Link

Adjusts the HDMI Link options that allow the projector or remote to control HDMI-connected devices that support the CEC standard

Device Connections: lists the devices connected to the HDMI1 and HDMI2 ports when HDMI Link is enabled

HDMI Link: enables or disables the HDMI Link feature

Audio Out Device: selects whether to output audio from the internal speakers or a connected audio/visual system

Power On Link: controls what happens when you turn on the projector or a linked device
  • Bidirectional: automatically turns on the connected device when you turn on the projector, and vice versa
  • Device -> PJ: automatically turns on the projector when you turn on the connected device
  • PJ -> Device: automatically turns on the connected device when you turn on the projector

Power Off Link: controls whether linked devices are turned off when the projector is turned off

HDMI EQ Setting 1, 2, or 3 Adjusts the HDMI input signal level depending on the devices connected to the HDMI port. Change the setting if there is a lot of interference in the image or if no image is projected.
Reset Signal I/O Settings   Resets all settings on the Signal I/O menu to their default values