Registering Digital Certificates from a Web Browser

You can register the digital certificates on the projector for wireless LAN authentication.
Note: You can also register the digital certificates in the projector's Network menu. However, be sure to register just once or the certificate may not install correctly.
  1. Make sure your digital certificate file is compatible with projector registration.
  2. Make sure the projector is turned on.
  3. Start your web browser on a computer or mobile device connected to the network.
  4. Type the projector's IP address into the browser's address box and press the computer's Enter key. You see the Web Control screen and a prompt to enter a user ID and password.
  5. Select Advanced and enter the following information in uppercase or lowercase letters, exactly as shown:
    • For the user ID, enter EPSONWEB. (You cannot change the user ID.)
    • For the password, enter the default password admin. (You can change the Web Control password using the projector's Network Settings menu.)
  6. Under Network, select Certificate.
    Note: You may need to select the menu icon to find Network, depending on your device.
    You see a screen like this:


  7. Click the Choose File button, select the certificate file, and click Open.
    Note: The button name may vary depending on the browser you are using.
  8. Enter a password in the Password box and click Send.
  9. When you finish registering the certificate, click Apply to finalize your changes and complete the registration.
Parent topic: Registering a Digital Certificate on the Projector