If you are unable to access the projector through a
web browser, make sure you are using the correct ID and password,
which are case sensitive.
Note: You cannot
change the user ID.
- You may need to log in to access some options on the Web
Control screen. If you see a log in window, enter EPSONWEB as the user ID and enter the password
set in the projector's Network menu as the password. The default
password is admin.
- Avoid connecting via a proxy server.
- Make sure you have access to the network the projector is
on.
- Check the IP address on the projector, then reenter the IP
address in the browser search bar.
- If you set the Standby Mode
setting to Communication On in the
projector's Operation menu, make sure the network device is turned
on. After turning on the network device, turn on the
projector.
Note: The user ID
and password are case sensitive.