If the "No Signal" message appears, try the
following solutions:
-
Press the
Source Search button and wait a few
seconds for an image to appear.
-
Turn on
the connected computer or video source, and press its play button
to begin your presentation, if necessary.
-
Check the
connection from the projector to your video sources.
-
If you are
projecting from a laptop computer, make sure it is set up to
display on an external monitor.
-
If
necessary, turn the projector and the connected computer or video
source off and then on again.
- If you are projecting from an HDMI source, replace the HDMI
cable with a shorter one.
- Connect the video source directly to the projector.
- Try a different video cable.
-
If the
other solutions do not solve the problem, reset all of the
projector settings using the options on the Reset menu.