Installing the Wireless LAN Module

To use the projector over a wireless network, install the optional Epson 802.11b/g/n wireless LAN module. Do not install any other type of wireless LAN module.
Caution:
Never remove the module while its indicator light is on or flashing, or while you are projecting wirelessly. You may damage the module or lose data.
  1. Turn off the projector and unplug the power cord.
  2. Loosen the screws and remove the air filter cover as shown (it is attached with a tether).


  3. Insert the wireless LAN module into the port.


  4. Replace the air filter cover as shown and tighten the screws.


  5. Plug in and turn on the projector.
Parent topic: Wireless Network Projection
Related reference
Optional Equipment and Replacement Parts
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use