You
can remove a lens to replace it with a different lens.
Warning: Wait
at least 30 minutes to remove or replace the lens after turning off
the projector. Touching the lens unit before it cools down may
cause burns.
Caution:
Remove the lens only when necessary and
make sure the front of the projector is not facing up when you
remove the lens. This prevents dirt or dust from entering the
projector and lowering the projection quality. Avoid touching the
lens with your bare hands to prevent fingerprints on or damage to
the lens surface.
- Press and hold the Lens Shift (remote control) or Lens (control panel) button for approximately 3 seconds to move the lens to the center position.
- Turn off the projector and unplug the power cord.
- Pull the lens cover off of the projector.
- Remove the stopper, if necessary.
- Hold the lens firmly as you pinch the lock lever and move it to the Release position. Then, gently pull the lens straight out of the projector.
