Settings on the Installation menu let you set up your projector for your installation environment. The available settings depend on the currently selected input source and other settings.
| Setting | Options | Description |
|---|---|---|
| Test Pattern | Display Position
Color Isolation: R Color Isolation: G Color Isolation: B |
Displays a test pattern to assist in focusing and
zooming the image and correcting image shape
The color isolation options let you display the selected color component of the projected image. These settings should be set by a professional color calibrator using specialized color calibration tools in a controlled lighting environment. |
| Projection | Front
Front/Ceiling Rear Rear/Ceiling |
Selects the way the projector faces the screen so the image is oriented correctly |
| Geometry Correction | H/V-Keystone
Quick Corner Point Correction |
Adjusts image shape to rectangular (horizontally and
vertically)
H/V Keystone: lets you manually correct horizontal and vertical sides Quick Corner: select to correct image shape and alignment using an on-screen display Point Correction: select to divide the projected image into a grid and correct distortion by moving a selected point |
| Blanking | Top
Bottom Left Right |
Hides the edges of the screen if there is noise from the input signal |
| High Altitude Mode | On
Off |
Regulates the projector's operating temperature at
altitudes above 4921 feet (1500 m)
Note: The
cooling fans inside the projector run faster and may sound louder
when this setting is enabled; this is normal. |
| Reset Installation Settings | — | Resets all settings on the Installation menu to their default values |