Adjusting the Image Position Horizontally Using Screen Shift

You can use the Screen Shift feature to adjust the image position horizontally without moving the projector when the Screen Type is set to 16:6.



Note: This feature is only available when the Aspect setting is set to Auto for the HDMI, Computer, and HDBaseT sources. It is not available when projecting split screen images.
  1. Turn on the projector and display an image.
  2. Press the following buttons on the remote control to position the image:
    • 4: positions the image to the left side of the screen
    • 5: positions the image in the center of the screen
    • 6: positions the image to the right side of the screen
  3. When you are finished, press Esc.
Note: The adjusted image location is only saved until the projector is turned off.
Parent topic: Using Basic Projector Features
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use