You
can use the projector's Point Correction feature to fine-tune the
image shape using points on a grid. This is useful for adjusting
overlapping areas in multiple projected images that do not line up
correctly.
- Turn on the projector and display an image.
- Press the Menu button.
- Select Installation > Geometry Correction > Point Correction.
- Select the Point Correction setting again and press
Enter.
Note: For fine tuning, select Quick Corner to roughly correct the shape and size of an image and then select Point Correction to adjust them more precisely. -
Select the number of grid lines to display and
press Enter. You see a grid on the
projected image.
Note: If you need to change the color of the grid lines, press Esc, select the Pattern Color setting, and select a suitable color.
-
Press the arrow buttons on the projector or
remote control to move to the point on the grid that you want to
adjust. Then press Enter.
- Press the arrow buttons as necessary to correct the image shape.
- Press Esc to return to the previous screen and select another point to correct, if necessary.
-
When you are finished, press the Menu button.
Note: If necessary, you can fine-tune your image adjustments using the Quick Corner setting.
