| User Button
|
Various options available |
Assigns a menu option to the User button on the remote control for
one-touch access |
| User's Logo
|
Start Setting
Reset
|
Creates the screen that the projector displays to
identify itself and enhance security |
| Control Panel Lock
|
Full Lock
Except for Power
Off
|
Controls projector button locking to secure the
projector
Full Lock: locks all
buttons
Except for Power:
locks all buttons except the power button
Off: no buttons
locked |
| Color Uniformity
|
Color Uniformity
Adjustment Level
Start Adjustments
Reset
|
Adjusts the color tone balance
Color Uniformity:
set to On to adjust the color
tone balance for the whole screen
Adjustment Level:
sets the adjustment level
Start Adjustments:
adjusts the red, green, and blue color tones individually for the
selected area
Reset: resets all
Color Uniformity adjustment values to their defaults |
| Refresh Mode
|
Timer
Messages
Start
|
Select Start to clear
an afterimage that remains in the projected image and turn off the
projector after the time specified in the Timer screen. Press any button to cancel
Refresh Mode. Enable the Messages
setting if you want to display a message when Refresh Mode is in
progress. |
| Light Source
Calibration
|
Run Now
Run Periodically
Last Run
|
Selects options to perform light source calibration to
maintain the color balance of the projected image
Run Now: Select
On to start light source
calibration now. Make sure the projector has been turned on for at
least 30 minutes for maximum accuracy. You may not be able to start
calibration if the projector's environmental temperature is out of
range.
Run Periodically:
Select On to perform calibration
every 100 hours of usage
Last Run: Displays
the date and time light source calibration was last
performed |
| Date & Time
|
Date & Time
Daylight Saving Time
Internet Time
|
Adjusts the projector's date and time settings
- Date & Time:
sets the date and time on the projector
- Daylight Saving
Time: enables daylight saving time
- Internet Time:
updates the time automatically via an online time server
|
| Schedule Settings
|
— |
Schedules projector events to occur automatically at
selected dates and times |
| Wireless LAN Power
|
On
Off
|
Enables or disables wireless communication |
| Wireless LAN
Diagnosis
|
Ping
IP Address
Ping until stopped
Start
|
Displays the status of the wireless LAN
communication |
| Log Save Destination
|
Internal Memory
USB and Internal
Memory
|
Selects where you want to save projector error and
operation log files; not available in Content Playback mode |
| Batch Setup Range
|
All
Limited
|
Selects which projector menu settings to copy using the
batch setup feature; select All
to copy all the settings, or select Limited to copy all settings except for the
following:
- Password
Protection settings
- EDID setting in
the Signal I/O menu
- Network menu
settings
|
| Language
|
Various languages available |
Selects the language for projector menu and message
displays |
| Information
|
Various options available |
Displays information about the projector and current
input signal; the displayed items vary depending on the current
input source
The Version option
displays version numbers for the projector and other
components |
| Display Logs
|
Display Status
Power On/Off History
|
Displays log data saved to the location specified in
the Log Save Destination
setting |
| Reset Management
Settings
|
— |
Resets all settings on the Management menu to their
default values except for Language |
