Volume
|
Varying levels available |
Adjusts the volume of the projector's speaker system or
external speakers |
Source
|
Signal Format
Overscan
HDMI IN EQ Level
HDMI Out Intensity
Reset to Defaults
|
Displays settings selected for the current input source
Signal Format: sets
the video range for certain input sources to match the setting of
an input source
Overscan: changes
the projected image ratio to make the edges visible by a selectable
percentage or automatically when projecting a component signal
HDMI IN EQ Level:
adjusts the HDMI input signal for each HDMI port; change the level
if there is interference in the signal or there is no projected
image
HDMI Out Intensity:
adjusts the signal intensity from the HDMI ports; change if the
HDMI image does not display correctly (not available on the
PowerLite EB-L520U)
Reset to Defaults:
resets all settings for the current input source |
EDID
|
HDMI1
HDMI2
HDBaseT
|
EDID: describes the
display capabilities of your projector when the selected input
source is HDMI; change this
setting as necessary according to the resolution of the current
input source |
A/V Output
|
While Projecting
Always On
|
Determines when the projector outputs audio and images
to external devices; set to Always
On to output audio and images when the projector is in
standby mode |
Audio Output
|
Auto
Audio1
Audio2
|
Sets the audio input port when projecting from input
sources other than HDMI, LAN, and Screen Mirroring |
HDMI Audio Output
|
HDMI1 Audio Output
HDMI2 Audio Output
|
Sets the audio input port when projecting from one of
the HDMI ports |
Monitor Out Port
|
Monitor Out
Computer2
|
Selects the function of the Computer2/Monitor Out port
Monitor Out: select
this option when outputting an image signal to an external
monitor
Computer2: select
this option when inputting an image signal from a computer |
HDMI Link
|
Device Connections
HDMI Link
Audio Out Device
Power On Link
Power Off Link
|
Adjusts the HDMI Link options that allow the projector
or remote to control HDMI-connected devices that support the CEC
standard
Device Connections:
lists the devices connected to the HDMI1 and HDMI2 ports when HDMI Link is enabled
HDMI Link: enables
or disables the HDMI Link feature
Audio Out Device:
selects whether to output audio from the internal speakers or a
connected audio/visual system
Power On Link:
controls what happens when you turn on the projector or a linked
device
- Bidirectional:
automatically turns on the connected device when you turn on the
projector, and vice versa
- Device -> PJ:
automatically turns on the projector when you turn on the connected
device
- PJ -> Device:
automatically turns on the connected device when you turn on the
projector
Power Off Link:
controls whether linked devices are turned off when the projector
is turned off |
HDBaseT
|
Control
Communications
Extron XTP
|
Selects the communication settings for connections to
an HDBaseT transmitter or switcher
Control
Communications: enables or disables communication from the
Ethernet and serial ports on the transmitter; turning on this
setting disables the projector's LAN and RS-232C ports (Extron XTP must be turned off to use this
setting)
Extron XTP: set to
On when you connect an Extron XTP
transmitter or switcher to the HDBaseT ports |
Reset Signal I/O
Settings
|
|
Resets all settings on the Signal I/O menu to their
default values |