Selecting Wired Network Settings

Before you can project from computers on your network, you must select the network settings for the projector using its menu system.

Note: Make sure you already connected the projector to your wired network using the LAN port.

Turn on the projector.
Press the Menu button.
Select the Network menu and press Enter.
Select Network Settings and press Enter.
Select Projector Name and enter a name up to 16 alphanumeric characters long to identify the projector on a network.
Set the Priority Control Interface setting to Wired LAN.
Select the Wired LAN menu and press Enter.
Select IP Settings and press Enter.
Select your IP settings as necessary:
- If your network assigns addresses automatically, turn on the DHCP setting.
- If you must set addresses manually, turn off DHCP and enter the projector's IP Address, Subnet Mask, and Gateway Address as needed.
Note: To highlight the numbers you want from the displayed keyboard, press the arrow buttons on the remote control. To select a highlighted number, press Enter. Alternatively, press and hold the Num button on the remote control while entering the desired numbers.
To prevent display of the IP address on the standby screen, turn off IP Address Display in the Wired LAN menu.
Select Return and press Enter to return to the Network Settings menu.
Select Network Projection and press Enter. You see a screen like this:
Set the Epson iProjection setting to On.
Select the following options as necessary:
- SSID Display lets you display the SSID on the network information screen and home screen.
- Display LAN Info lets you select how the projector displays network information. You can select an option to display a QR code that lets you quickly connect your iOS or Android devices using the Epson iProjection app.
- Moderator Password lets you enter a password up to 4 numbers long for accessing the projector as a moderator with the Epson iProjection (Windows/Mac) software or the Epson iProjection app. (No default password.)
- Keyword Interrupt Display lets you select whether to display a projector keyword on the projected image when accessing the projector using Epson iProjection.
Note: Use the displayed keyboard to enter the password and keyword. Press the arrow buttons on the remote control to highlight characters and press Enter to select them.
When you finish selecting settings, select Return and press Enter to return the Network Settings menu.
Select Set, and follow the on-screen instructions to save your settings and exit the menus.