Sharing Your Screen

You can share your projected image to up to four projectors connected to the same network.

Before sharing your screen, make sure the Screen Sharing setting is enabled.

Note: Make sure your projector is not connected to any devices via Epson iProjection before you use the screen sharing function.

Turn on the projector.
Connect your projector to the same network as the host projector that is sharing its screen.
Press the Home button on the projector or the remote control.
Select Screen Sharing.
Select Start Screen Sharing.
Select the projector you want to share your screen with using one of the following methods:
- Enter the IP address of the projector using the numeric keypad.
- Enter the projector keyword using the numeric keypad, if required. The projector keyword is displayed on the projected image of the receiving projector.
- Choose a previously selected projector by selecting an IP address from the connection history list.
Select Connect. The connection is established and you see the Home screen. A status bar indicating the sharing status appears on the screen.
Repeat steps 6 and 7 to add additional projectors as necessary.
When you are finished, select the input source from which to project images.

If you press the Esc button to stop sharing your screen, all connected projectors are disconnected. To disconnect a specific projector, press the Home button and select Screen Sharing, then select the projector you want to disconnect and select the icon next to the IP address.

Note: If you want to skip authenticating keywords for other projectors to speed up the connection process, set the Network > Network Settings > Network Projection > Screen Sharing > Connection Mode setting to Keyword Off.