Installing the Wireless LAN Module

To use additional wireless connections (PowerLite EB-L530U/EB-L630U/EB-L630SU/EB-L635SU/EB-L730U/EB-L735U) and to use the projector over a wireless network (PowerLite EB?L520U), install the optional Epson wireless LAN module. Do not install any other type of wireless LAN module.
Caution:
Never remove the module while its indicator light is blue or flashing, or while you are projecting wirelessly. You may damage the module or lose data.
Note: The indicator on the wireless LAN module does not operate. See the wireless LAN indicator on the projector to check the wireless LAN status.
  1. Turn off the projector and unplug the power cord.
  2. Use a Phillips-head screwdriver to remove the screw securing the wireless LAN module cover, then remove the cover.


  3. Insert the wireless LAN module into the USB-A port.


  4. Replace the wireless LAN module cover and secure it using the screw you removed.


  5. Plug in and turn on the projector.
Parent topic: Wireless Network Projection
Related tasks
Turning Off the Projector
Selecting Wireless Network Settings Manually
Related reference
Projector Light Status
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use