If you are unable to connect to the projector using
Screen Mirroring, try the following solutions:
- Set the Simple AP
setting to On.
- Make sure
On is
selected as the Screen
Mirroring setting in the projector's Network menu.
Try turning the setting off and then on again, if
necessary.
- Make sure
the Operation Mode and
Channel settings are correct for
your mobile environment and try connecting again.
- If you are unable to use two Screen Mirroring
sources at the same time, set the Network > Network Settings > Screen Mirroring > Interrupt Connection setting to Off.
- Make sure the mobile device settings are
correct.
- You may not be able to connect immediately after
disconnecting from the projector. Wait a while and try connecting
again.
- Restart the mobile device.
- If you have previously connected to the projector
using Screen Mirroring, the device may have saved the previous
connection information. Delete the saved information and connect to
the projector from the list of available devices.